WavePhone Calling Features

The following comprehensive calling features come free with the Unlimited WavePhone Plan, or can be added to the Regional or Basic WavePhone Plans for just $5/month.

Call Waiting

A tone will announce an incoming call when you are already on the phone. This feature comes automatically activated when included with or added to your WavePhone service.

Cancel Call Waiting (*70)- Turns off call waiting on a per-call basis.

Caller ID and Call Waiting Caller ID

View caller information for incoming calls. These features come automatically activated when included with or added to your WavePhone service.

Caller ID Block (*67)

Block your Caller ID information from displaying on outbound calls, on a per-call basis. Enter the code before making the call.

Disable Caller ID Privacy (*82)

This feature is used if you have caller ID privacy set as a permanent feature on your WavePhone. You will receive a message when calling an individual that does not accept anonymous calls. Simply hang up, dial *82 and try again.

Repeat Dial (*66)

Allows you to automatically redial the last number you dialed in which you received a busy signal. The system will continue to dial that number for up to 30 minutes. When the line is available, your phone will make a distinctive ring.

Cancel Repeat Dial (*86)- Cancels the repeat dial function before the 30 minute time frame ends.

Return Call (*69)

Return the call of the last person who called you. Like Repeat Dial, if the line is busy it will continue to redial the number for up to 30 minutes.

Note: If the caller is calling you from a cellular phone, this feature will tell you the number of the last caller but you will receive a busy signal if you attempt to dial them back through the Return Call menu. Simply hang up and dial the number directly.

Cancel Return Dial (*89)- Disable return call before the 30 minute time frame is over.

Call Forward (*72)

Forward incoming calls to another telephone number. If you forward calls to a long distance number, long distance charges may apply depending on your Wave Phone package.

Cancel Call Forward (*73)- Disables current call forwarding.

Selective Call Forwarding (*63)

Forward calls from a list of up to 10 people to another phone line. All other calls will ring through normally. Enter code again to edit or cancel Selective Call Forwarding. Simply listen to the helpful prompts that will walk you through setting up, adding and removing numbers or turning off this feature.

Note: Selective Call Forwarding and Call Forwarding can be available on the same line, but only one can be active at a time.

Selective Call Rejection (*60)

Screen calls from up to 12 numbers that you specify. Enter code again to edit or cancel Selective Call Rejection. Simply listen to the helpful prompts that will walk you through setting up, adding and removing numbers or turning off this feature.

Selective Call Acceptance (*64)

Lets you choose up to 10 people you would like to hear from. Everyone else will hear a message stating that you are not receiving calls at this time. This feature is available as a monthly subscription only.

Anonymous Call Rejection (*77)

Automatically blocks numbers that have disabled their caller ID information. They will hear a message that you are not receiving anonymous calls with instructions on how to disable their caller ID privacy.

Cancel Anonymous Call Rejection (*87) disables anonymous call rejection.

Distinctive Alert (*61)

Assign up to 12 phone numbers a distinctive ring. To set up this feature, dial *61, then follow the helpful prompts to add or remove numbers.

Speed Dial (*74)

Stores up to eight unique numbers for convenience and speed. It is as easy as pressing a one-digit number followed by the # key. Adding a new number on speed dial automatically replaces the previously saved number.

To remove a number from your speed call list, you must replace it with another number.

Two-Digit Speed Dial (*75)

Stores up to thirty unique numbers for convenience and speed. It is as easy as pressing a one-digit number followed by the # key. Adding a new number on speed dial automatically replaces the previously saved number.

To remove a number from your speed call list, you must replace it with another number.

Three Way Calling

Allows you to bridge together two lines in addition to your own so that three separate individuals can speak on a single call.

Note: Some phones have a "flash" or "link" button. Use this instead of the receiver button to change lines. While using three way calling, call waiting is unavailable.

  • Woman Happy About Saving Money by Bundling with Wave